dmesg - Intel Pentium Dual E2200

Return To Intel Pentium Dual E2200 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
Command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007dbffbff] usable
BIOS-e820: [mem 0x000000007dbffc00-0x000000007dc53bff] ACPI NVS
BIOS-e820: [mem 0x000000007dc53c00-0x000000007dc55bff] ACPI data
BIOS-e820: [mem 0x000000007dc55c00-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: Dell Inc. OptiPlex 760                 /0F373D, BIOS A02 02/18/2009
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7dbff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 07DE00000 mask FFFE00000 uncachable
  1 base 07E000000 mask FFE000000 uncachable
  2 base 07DD00000 mask FFFF00000 uncachable
  3 base 080000000 mask F80000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x7c400000-0x7c5fffff]
 [mem 0x7c400000-0x7c5fffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7c3fffff]
 [mem 0x7c000000-0x7c3fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7c600000-0x7dbfefff]
 [mem 0x7c600000-0x7d9fffff] page 2M
 [mem 0x7da00000-0x7dbfefff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
RAMDISK: [mem 0x7c7a3000-0x7dbfefff]
ACPI: RSDP 00000000000fec00 000024 (v02 DELL  )
ACPI: XSDT 00000000000fc7ef 00008C (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: FACP 00000000000fc91f 0000F4 (v03 DELL    B10K    00000015 ASL  00000061)
ACPI: DSDT 00000000fff1be4b 00536F (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 000000007dbffc00 000040
ACPI: SSDT 00000000fff21492 00009A (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fca13 000092 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: BOOT 00000000000fcaa5 000028 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ASF! 00000000000fcacd 000096 (v32 DELL    B10K    00000015 ASL  00000061)
ACPI: MCFG 00000000000fcb63 00003E (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: HPET 00000000000fcba1 000038 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: TCPA 00000000000fcdfd 000032 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ____ 00000000000fce2f 000030 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SLIC 00000000000fcbd9 000176 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SSDT 000000007dbffc40 0001B7 (v01 DpgPmm  Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 000000007dc00049 0001B7 (v01 DpgPmm  Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 000000007dc00452 000190 (v01 DpgPmm    CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007dbfefff]
Initmem setup node 0 [mem 0x00000000-0x7dbfefff]
  NODE_DATA [mem 0x7c79e000-0x7c7a2fff]
 [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079e00000-ffff88007bdfffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x7dbfefff]
On node 0 totalpages: 514973
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 7984 pages used for memmap
  DMA32 zone: 510975 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007c400000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 506904
Policy zone: DMA32
Kernel command line: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1988724K/2059892K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 71168K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2194.380 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.76 BogoMIPS (lpj=8777520)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) Dual  CPU  E2200  @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8777.52 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7dbffc00-0x7dc53bff] (344064 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:19:24, date: 05/12/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab  at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0x7F (20131115/tbprint-214)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe800000-0xfebfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xec98-0xec9f]
pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
pci 0000:00:02.1: reg 0x10: [mem 0xfe700000-0xfe7fffff 64bit]
pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfe6e0000-0xfe6fffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfe6d9000-0xfe6d9fff]
pci 0000:00:19.0: reg 0x18: [io  0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0xff20-0xff3f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0xff00-0xff1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0xfc00-0xfc1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfe6da000-0xfe6da3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfe6dc000-0xfe6dffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a1a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
pci 0000:00:1f.2: reg 0x20: [io  0xfec0-0xfecf]
pci 0000:00:1f.2: reg 0x24: [io  0xeca0-0xecaf]
pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfe6db000-0xfe6db0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xece0-0xecff]
pci 0000:00:1f.5: [8086:3a06] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0xfe40-0xfe47]
pci 0000:00:1f.5: reg 0x14: [io  0xfe50-0xfe53]
pci 0000:00:1f.5: reg 0x18: [io  0xfe60-0xfe67]
pci 0000:00:1f.5: reg 0x1c: [io  0xfe70-0xfe73]
pci 0000:00:1f.5: reg 0x20: [io  0xfed0-0xfedf]
pci 0000:00:1f.5: reg 0x24: [io  0xecb0-0xecbf]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfec00000] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xff980000-0xff980fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7dbffc00-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 40 for MSI
hpet: hpet3 irq 41 for MSI
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io  0x0800-0x085f] could not be reserved
system 00:00: [io  0x0c00-0x0c7f] has been reserved
system 00:00: [io  0x0860-0x08ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.1:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:04: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20848K (ffff88007c7a3000 - ffff88007dbff000)
Simple Boot Flag at 0x7a set to 0x1
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1399893568.652:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 3925
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 22, io mem 0xfe6da000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
  Magic number: 14:331:327
rtc_cmos 00:04: setting system clock to 2014-05-12 11:19:29 UTC (1399893569)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=1221, idProduct=3234
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Flash Disk
usb 1-1: Manufacturer: USB2.
usb 1-1: SerialNumber: JXLQWE214203431
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
tsc: Refined TSC clocksource calibration: 2194.486 MHz
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-8: WDC WD800AAJS-75M0A0, 02.03E02, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800AAJS-75 02.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[122]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
wmi: Mapper loaded
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi4 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=03f0, idProduct=0024
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: HP Basic USB Keyboard
usb 3-2: Manufacturer: CHICONY
hidraw: raw HID events driver (C) Jiri Kosina
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:9b:1c:47:5b
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: 8021FF-0FF
[drm] Memory usable by graphics device = 2048M
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input4
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.0-2/input0
i915 0000:00:02.0: irq 49 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Switched to clocksource tsc
scsi 4:0:0:0: Direct-Access     USB2.0   Flash Disk       3.90 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 3891200 512-byte logical blocks: (1.99 GB/1.85 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
random: nonblocking pool is initialized
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[984]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
lp0: using parport0 (interrupt-driven).
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \GIC2 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GIC1 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
init: cups main process (1090) killed by HUP signal
init: cups main process ended, respawning
WARNING! power/level is deprecated; use power/control instead
device-mapper: multipath: version 1.6.0 loaded
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Dell WMI hotkeys as /devices/virtual/input/input6
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
gpio_ich: GPIO from 184 to 255 on gpio_ich
init: failsafe main process (1230) killed by TERM signal
autoconfig: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line
   speaker_outs=1 (0x13/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   inputs:
     Mic=0x14
     Line=0x15
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
init: alsa-restore main process (1560) terminated with status 99
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
usb 8-2: new low-speed USB device number 2 using uhci_hcd
usb 8-2: New USB device found, idVendor=1241, idProduct=1166
usb 8-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input11
hid-generic 0003:1241:1166.0002: input,hidraw1: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.2-2/input0
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Return To Intel Pentium Dual E2200 System Information